: Vendor::: Atheros AR2315 @Frq MIPS 4Kc @180MHz Flash size: 4 MiB Flash Chip: ST 25P32V6P RAM size: 16 MiB RAM Chip: ISSI IS42S1680A-7TL / SDR-100 Wireless: SoC-integrated: Atheros 802.11b/g (400mW) Ethernet: 1 port connected to the CPU USB: No Power: passive POE (pairs 4,5+; 7,8 return) 12 to 24 VDC (POE injector included in the package):: This device is an integrated wifi spot designed to be used outdoor. With Ubiquiti Firmware, AirOS 3 actually, it can act as station, station WDS, client, client wds There is a dual patch antenna system able to work in vertical or horizontal polarity, or to send RF to an external RP-SMA female or SMA female connector (depending of date of manufacturing) - This feature is software selectable with AirOS.

In order to upgrade from OpenWrt to a newer version, both the kernel mtd and filesystem mtd must be reflashed. The kernel is likely lzma compressed.

MONSTER RANCHER 2. The Complete GameShark Cheater's Guide. By xiaNaix@mindless.com. The use of these codes may spoil the Monster Rancher 2 experience. I hope you will instead use them sparingly to 'enhance' your game. Cheat monster rancher 2 psx gameshark codes. Monster Rancher 2 Gameshark Cheats. Click here if you don't know what a Gameshark is. What's needed: 1. Epsxe (Psx Emulator). Monster Rancher 2 Iso / CD image. PEC (Psx Emulation Cheater). PEC Editor (to add MR2 gameshark codes).

If either mtd block isn't big enough, reflashing can not be completed through OpenWrt, but must be done through the. Recent versions of OpenWrt (8.09.2 and newer) support sysupgrade on this platform. To upgrade, put a combined firmware image into /tmp on the device and flash it using the sysupgrade command as outlined below.

Txd converter to sin nanostation rxd converter to sout nanostation gnd to gnd The USB-TTL converter should be set to 3.3V, if it's selectable.

Cd /tmp wget sysupgrade openwrt-atheros-combined.img Loading via tftp. Tftp the image in binary mode to 192.168.1.20 as 'flash_update'. Tftp 192.168.1.20 tftp> bin tftp> put openwrt-atheros-ubnt5-squashfs.bin flash_update Sent 1965199 bytes in 28.8 seconds tftp> quit or in Windows Dos prompt tftp -i 192.168.1.20 put openwrt-atheros-ubnt5-squashfs.bin flash_update 7. Signal LEDs might be blinking during the upgrade. On a Nano5L, the power lights go back and forth. Wait ~7 minutes before restarting or until the power lights stop their back and forth blinking. The device should be back to its old configuration (OpenWrt doesn't overwrite or modify the NVRAM settings).

Telnet to 192.168.1.1 and set a password with passwd Restore Original AirOS firmware on Nanostation. The two internal antennas work more or less automatically, using the driver's “diversity” setting to choose the correct one. Using an external antenna requires manually setting a few things: sysctl set dev.wifi0.softled 0 gpioctl 7 0 These can be added to an init file in /etc/rc.d and /etc/init.d In recent OpenWrt versions (8.09.1+) the antenna setting is covered by the wireless configuration. The corresponding option is called antenna and should be set within the wifi-iface section. Uci set wireless.@wifi-iface[0].antenna=mode uci commit wireless wifi. +Ethernet eth0: MAC address 00:15:6d:a8:b9:c2 IP: 0.0.0.0/255.255.255.0, Gateway: 0.0.0.0 Default server: 0.0.0.0 RedBoot(tm) bootstrap and debug environment [ROMRAM] Ubiquiti Networks certified release, version 0.9.151313 - built 13:14:44, Mar 15 2011 Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. Board: Ubiquiti Ubiquiti AR2315/6/7/8 based board (Ubiquiti NanoStation2 detected) Arch: ar2316 RAM: 0x80000000-0x81000000, [0x80040b80-0x80fe1000] available Flash: 0xbfc00000-0xbfff0000, in 64 blocks of 0x00010000 bytes each == Executing boot script in 1.000 seconds - enter ^C to abort RedBoot> cache off RedBoot> fis load -d -e kernel Trying LZMA decompression.