• Types of Doors that can be automated using the digi.one: • Sectional overhead doors, single/double, steel or timber. • Tip – up doors, steel or timber. • Page 1 eatures Microprocessor based control system One button to open, close and stop Bright LED courtesy light, with a 3 minute time-out Easily adjustable operating force/obstacle sensing Supports Safety Beams Optional back-up battery Auto-close feature 24V DC Motor provides superior power to weight, giving quiet, smooth operation with soft starting and stopping Protected against overload and over-heating Reliable chain-drive Sturdy steel Rail. • Page 2 Installation 4.1 Recommended Tools and Equipment for this Installation Electric Drill – Spirit Level Impact, Variable Speed, Reversible Tape Measure – 5m Drill Bits Hammer Masonry: 6mm, 10mm Spanners Steel: 6mm, 10mm, 12mm Sockets: 8mm, 11mm, 13mm Hacksaw Flat/Ring: 10mm, 11mm, 13mm, 14mm Screwdriver - Step Ladder –. • Page 3 Using suitable material bolted to the Cross Member, secure the Power Head overhead, so that the Rail is horizontal. Plug the Mains Cord into a socket installed according to regulations. Electrical Terminals and Connections Note: The Terminals can be accessed by un-clipping and removing the Light Lens.

Page 7: Assembly/installation. Download film semi lies godjima. Remove power (including battery power if fitted.) (Disconnect the batteries by No representative or person is authorized to assume for Hydro Doors any other liability in unplugging the 2-way connector on the battery charger board. 6, p16) connection with the sale of this product.

Should the main cover need to be removed, remove the screw at the front and support the cover so that the hook at the rear is not stressed. • Page 4 Programming the operator (Note: The operator will exit programming if left for 30 seconds.) (Programming cont.) Press and hold the CODE button for 8 seconds. Preparation dL dL ‘dL’ is displayed With the Carriage Release Lever horizontal, Operating Force Adjustment move the door by hand until the Carriage engages with the Shuttle. ‘Electrical Terminals and Connections Manufacturer’s Warranty Hydro Doors and Gates (Pty) Ltd (Hydro) warrants the first purchaser of the digi.one, that the product shall be free of any • defects in materials and/or workmanship for a period of twelve months (one Year) from the verifiable date of purchase.

Such verification shall include a valid proof of purchase by the first retail purchaser, which shall include, if possible, the Serial number of the motor under warranty.