Any Gate(에니게이트). Mahabharat serial songs mp3 download. 3com (한국쓰리콤). 5) It's different for different manufacturers of the router, so please refer to the manual of. - Wireless Routers User ID http Password (none) Level Administrator 1. 360 Systems - Image Server 2000 User ID factory Password factory.

I've got the 5200N model, so they're likely pretty similar. You probably know this, but there is a little pinhole button on the back of the router that, if you hold it in for 5 to 10 seconds, will set the router to base defaults. It should then work with an Open (no security) signal.

After you've done that, you can set up security by the following (assuming it's like mine): 1. Make sure your computer is plugged into one of the 5 computer ports 2. Make sure the main 'out' port is plugged into the wall, or your cable modem, or whatever you have for internet. Open Internet Explorer and type 192.168.10.1 and press Enter 4. There should be an Anygate screen that comes up. I am going from memory here, but you should be able to log in just by clicking the button to do so (since you reset) or you may have a default password such as 'admin' without the quotes.

On my router page that comes up, there is a menu choice at the bottom right that says 전문가 설정, along with a little heart icon. Click that Korean button and then you should be able to set-up your wifi signal with security. Click down the menu list under 무선 설정 and next to the first choice (SSID) Type in the name you want your wifi signal to have (something like 'Johnson Home'). You should also have a set of boxes you can choose for the type of signal you are transmitting.

Choose 유무선 공유기. You can choose to set the channel it transmits on, either manually or automatically. 채널 설정 will let you do this. You can probably just leave this alone. The pulldown number with a percentage (probably 100% at default) under 무선 출력 세기 is the power output amount. You can leave this alone.

If your house is not huge, set it to 50%. I do this because I feel it prolongs the life of the router, and the signal is not degraded much. If you have a large home, just leave it at 100% (you can leave it alone, in any case). Press 확인 (Enter) to save those settings. You'll have to wait at least 10 seconds for a router restart. On the left side, find and click on 무선 보안 설정.

There is a box next to 공유키(비밀번호). This is where you type your security password.

Choose WPAPSK and AES for best security. Leave the 암호를 통한 보안설정 checked, if you have it. Press 확인 (Enter) to save those settings. You'll have to wait at least 10 seconds for a router restart. I think this will do it for you. I have typed this assuming you do not have a static IP address. Paragon key serial number.

If you do, then it's another whole ballgame (but you probably don't have one if it is your home).